Equipment for the production of sandwich panels

Sandwich panel item assemblies (modular structure) are produced by cold roll profiling galvanized metal with a protective and decorative coatings.
Rolling line consists of the following units and aggregates:
 - Razmatyvatel roll of metal;
 - guillotine shears with straight blades (early);
 - rolling mill profiling (23 frames);
 - hydraulic shears prosechnye (Replacement blades);
 - Reception table;
 - The system of automatic control (on the basis of Siemens).
Equipment for the production of cluster profile (sandwich panel assembly item) is made on the basis of technical requirements of the customer, taking into account all the wishes and capabilities of our enterprise.
For the production of sandwich wall panels used coil galvanized steel with decorative protective coating in accordance with GOST 30246-94.

Technical characteristics of equipment

Drive power rolling mill, kW

 2 х 5,5 = 11,0

Drive power gilot. scissors, KW


Power drive oil, KW


Dimensions line, mm


The thickness of the tape, mm

0,8 - 1,0

The original roll, band width, mm

900; 1000

Rolling speed, m / s

От 0,2

Performance line, m / shift (8 hrs.)

From 5 000

Number of working stands rolling mill


Line Weight, kg

Approx. 17 000

Major suppliers of metal:
  • JSC "NLMK" (Lipetsk, Russia);
  • JSC Severstal (Cherepovets, Russia);
  • JSC "Mittal Steel Temirtau" (Kazakhstan);
  • JSC "MMK" (g.Magnitogorsk, Russia);
  • Ltd. "MAPOS" (Obninsk, Russia).