Transportation sandwich panels

For the transportation of the sandwich panels can be used technically efficient road and rail transport.

Sandwich panels in packs insulated from each other by foam pads, and the packs are placed in polyethylene film. Such packaging done at the factory to ensure the safety of the cargo carried. Loading area should not have sharp details and speakers markedly expressed defects.

In the carriage of sandwich panels in the open platforms of road transport packets are stacked in 2 series in the width. The length of the platform vehicle shall not be less than the length of the sandwich panels.

When loading is necessary to examine each stack sandwich panels, with the discovery of defects in the package is necessary to restore its integrity and suitability for transportation. Tutus with sandwich panels must be transported separately from other cargo, the vehicle must be equipped with transport belts for saving the cargo during transportation by the poor roads.

The optimal width of the loading area is 2450-2500 mm. Rail transport is a more reliable means of transportation of goods, as well as sandwich panels are stacked in a wooden container, which is fixed in cars. Solid fixation of each wooden box protects the cargo from the displacements.

Loading and unloading of sandwich panels - particularly responsible operations, which should not be carried out manually. Before the rise of the goods must carefully examine each stack, the condition of the packaging. Unloading of sandwich panels made with the help of a crane jib or arm through the cross-beams or cross beams, special loop devices with the flat ropes. Each pack discharged separately and carefully lays down the ropes, so that the center of gravity coincides with the center cross.