Options wall fence

Variants protections

Variant А

The Cavity a panel sandwich it is filled soft, it is executed rigid.
1. A column.
2. A cassette profile.
3. The self-cut screw 5,5х32 (to a column to 14 mm).
4. The self-cut screw 4,2х19.
5. The self-cut screw 4,8х50.
6. Soft.
7. Front metal facing.
8. Heaters intercassette.
9. An aluminium sticky tape.
10. A sealant "column-cartridge".
11. Rigid.
12. Socle outflow.
13. A socle heater.
14. A socle.
15. A sealant "socle-cartridge".
16. A cassette profile (sandwich-panel). A variant the Cavity of the cartridge of the sandwich-panel is filled soft, is executed rigid. Facing fastening - on a hat profile. 1. A column. 2. A cassette profile. 3. The self-cut screw 5,5х32 (to a column to 14 mm). 4. The self-cut screw 4,2х19. 5. The self-cut screw 4,8х50. 6. Soft минвата. 7. Front metal facing. 8. Heaters intercassette. 9. An aluminium sticky tape. 10. A sealant "column-cartridge". 11. Rigid минвата. 12. Socle outflow. 13. A socle heater. 14. A socle. 15. A sealant "socle-cartridge". 16. A hat profile. 17. A cassette profile (a sandwich the panel).

Variant B

The cavity of the cartridge of the sandwich-panel is filled soft, is executed rigid. Facing fastening - on a hat profile.
1. A column.
2. A cassette profile.
3. The self-cut screw 5,5х32 (to a column to 14 mm).
4. The self-cut screw 4,2х19.
5. The self-cut screw 4,8х50.
6. Soft.
7. Front metal facing.
8. Heaters intercassette.
9. An aluminium sticky tape.
10. A sealant "column-cartridge".
11. Rigid.
12. Socle outflow.
13. A socle heater.
14. A socle.
15. A sealant "socle-cartridge".
16. A hat profile.
17. A cassette profile (a sandwich the panel).

Variant C

The cartridge Cavity it is filled soft it is executed from a film. Facing fastening - through thermorupture.
1. A column.
2. A cassette profile.
3. The self-cut screw 5,5х32 (to a column to 14 mm).
4. The self-cut screw 4,2х19.
5. The self-cut screw 4,8х50.
6. Soft.
7. Front metal facing.
8. Heaters intercassette.
9. An aluminium sticky tape.
10. A sealant "column-cartridge".
11. A thermodividing strip.
12. A wind-shelter film.
13. Socle outflow.
14. Socle heater.
15. A socle.
16. A sealant "socle-cartridge".
17. A cassette profile (the panel).

Variant G

The cartridge Cavity is filled rigid. Facing is executed from the front panel.
1. A column.
2. A cassette profile.
3. The self-cut screw 5,5х32 (to a column to 14 mm).
4. The self-cut screw 4,2х19.
5. The self-cut screw 4,8х50.
6. The self-cut screw 4,8х28.
7. Soft.
8. Intercassette.
9. An aluminium sticky tape.
10. A sealant "column-cartridge".
11. Rigid.
12. Socle outflow.
13. A socle heater.
14. A socle.
15. A sealant "socle-cartridge".
16. A hat profile.
17. The front panel.
18. A cassette profile (a sandwich the panel).

On materials of the industrial company "Metal the Profile"